Fume hood scrubber
Fume hood scrubber
Fume hood scrubber
- Drizgas Tech Fume Hood Scrubber provides excellent air pollution control for water soluble chemicals present in the laboratory fume hood exhaust fumes.
- These Scrubber Fume Hood are designed to save space and provide effective air pollution control and operator safety protection for fume hoods.
- Fume hood scrubbers can effectively reduce concentrations of certain water soluble acid, base and organic contaminants exhausted from a fume hood. If you are concerned about duct corrosion, hazardous stack emissions or other environmental factors associated with a fume hood you may want to consider a scrubber.
- This is especially important for per chloric acid fume hoods, so as to prevent a build-up of potentially explosive perchlorate salts on the exhaust fan, as well as, on the exhaust ducting system.
Special features
- Excellent removal efficiencies: Efficient counter-current gas/liquid contact results in 95-98% efficiency for most water-soluble acid and base laden airstreams.
- Durable: Entire body of scrubber system made of chemical and corrosion resistant polypropylene.
- Compact: The packing, spray manifold and mist eliminator counted on top of fume hood, pump and reservoir in the base cabinet. This arrangement ensures that minimal extra space is required for the scrubber system.
- Floor standing & epoxy coated
- Velocity control of approximately 80-100 feet per minute.
- Semi close ventilated exposures.
- Provided with sliding sash made out of special grade shatter proof glass duly framed in wooden/aluminum frame with sliding motion and counter weight balanced mechanism.
- Illumination level of approx. 800 lux on the work table.
- heavy duty exhaust system, comprising of dynamically balanced centrifugal impeller with high speed motor
- suitable FRP ducting of required dimension as per the individual requirements
Working principle
- Contaminated air from the fume hood enters the unit and passes through a packed bed then through the liquid spray section, a mist eliminator and then into the exhaust system for release outside the building.
- The scrubbing liquor is recirculated from the sump and back to the top of the system using a pump. The air and the scrubbing liquor pass in a countercurrent fashion for efficient gas/liquid contact.
- Water soluble gases, vapors and aerosols are dissolved into the scrubbing liquor. Removal efficiencies for most water soluble acid and base laden airstreams is 95-98%. Particulates are also captured quite effectively by this type of scrubber.
Features
- Can handle air flow rate from 100 to 30,000 CFM
- Removal method is Absorption / Chemisorption
- Material of Construction: PP, FRP, PP+FRP, MS+FRP, SS 304, SS 316
- High efficiency Tellerette®Tower Packing removes soluble/reactive gases, solid particulate and liquid droplets down to 7 microns
- Lower shell serves as integral sump for recycle of liquid
- Spray nozzles accessible from top of unit
- Entrainment separators prevent liquid carryover
- Special multi-bed packing designs accommodate different scrubbing solutions for removal of multiple contaminants
We can design and manufacture a custom Fume hood scrubber to fit your precise application and will provide you with outstanding performance and low maintenance requirements. Drizgas Tech is one of leading manufacturers of Fume hood scrubber in India. Contact us with your process information so we can begin discussing the type of new equipment that best fits your situation.
Advantages
- No risk of harmful gases exhaust
- Environment friendly
- Highly rigid
- Low maintenance cost
- Easy to install
- High performance
Chemicals can be treated
- Hydrochloric Acid (Hydrogen chloride)
- Sulfuric Acid
- Hydrofluoric Acid (Hydrogen fluoride)
- Perchloric Acid
- Potassium Chloride
- Sodium Hydroxide
- Sodium Chloride
- Sodium Hypochlorite
- Hydrogen Peroxide
- Acetic Acid
- Ammonia
- ortho-Phosphoric Acid
- ortho-Boric Acid
- Nitric Acid
Frequently Asked Questions
A Fume Hood Scrubber is an air pollution control device that helps remove harmful water-soluble chemicals and pollutants present in exhaust gases from laboratory fume hoods. It improves air quality by filtering out contaminants before releasing the air outside.
The scrubber works by drawing contaminated air from the fume hood into the unit, where it passes through a packed bed, liquid spray section, and mist eliminator. The scrubbing liquor, typically water or other solutions, absorbs the contaminants, which are then released into the exhaust system.
The scrubber is designed to handle a variety of water-soluble chemicals such as Hydrochloric Acid, Sulfuric Acid, Hydrofluoric Acid, Perchloric Acid, Sodium Hydroxide, Ammonia, Acetic Acid, and more.
Key features include high removal efficiency (95-98%), compact design for space-saving, durable construction using chemical-resistant materials, and the ability to handle airflows from 100 to 30,000 CFM. It also comes with high-efficiency packing for removal of gases and particulates.
The scrubber ensures no harmful gases are released into the environment, provides low maintenance costs, is easy to install, and offers high performance. Additionally, it helps prevent duct corrosion and hazardous stack emissions.